Filter
Top Products
Installation
4
Connection
( 1A )
TV ANTENNA INPUT
TO MONITOR UNIT
( 1A )
–
+
(Accessory D)
Ignition wire (Red) ª12V
ACC
Ignition key switch
Ground wire (Black) · (To car chassis)
Battery
Car fuse box
(Main fuse)
•Make sure to ground the unit to a negative 12V DC power supply.
• If your car's ignition does not come with an ACC position, connect the ignition wires
to a power source that can be turned on and off with the ignition key. If you connect
the ignition wire to a power source that receives a constant voltage supply, as with
battery wires, the battery may die.
• If the fuse blows, first make sure that the wires have not caused a short circuit, then
replace the old fuse with one with the same rating.
• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the
car are working properly.
• Thoroughly wipe away oil and other dirt from the installation surface.
Please avoid installation on uneven surfaces.
(Accessory A)
(Black)
Remove the protective sheet on
the black connector before the
KTC-V500N is connected.
(White)