Filter
Top Products
Every receivable Channel is checked for 10 seconds.
1 Select a scan item from the menu item list.
2 Start Channel Scan
Press the [4] or [¢] button for at least 1 second.
The channel scan will start.
3 Release it when the channel you want to listen to is received
Press the [4] or [¢] button for at least 1 second, or press
the [MENU] button to release the menu mode.
Channel Scan
Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
Display Operation
"Channel" Normal manual seeking control.
"Preset" Search in order of the channels in the Preset
memory.
This function cannot be used in the category and channel search
mode.
Switching Seek Mode
Putting the channel in the memory.
1 Select the preset band
Press the [FM] button.
2 Enter Memory mode
Press the [P.M] button for at least 1 second.
"Preset Memory" is displayed.
3 Select the channel to put in the memory
Press the [4] or [¢] button.
4 Select the preset number
Press the [FM] or [AM] button.
5 Put the channel in the memory
Press the [P.M] button for at least 2 seconds.
The preset number display blinks 1 time.
6 Repeating steps 3 to 5 and putting the desired channel in the
memory.
On each band, 1 channel can be put in the memory on each [1]
— [6].
7 Exit Memory mode
Press the [P.M] button.
• Only the channel number is stored. Category information is not
stored.
• You can set up to 6 memories even on a control unit with 8 preset
buttons.
Channel Preset Memory
— 13 —
KTC-SR903(K)English 04.4.20 6:02 PM Page 13