Filter
Top Products
English 63
6
7
9
10
8
6 Returns to the "System Setup 1" screen.
7 Moves to the "System Setup 3" screen.
8 Sets the button illumination color.
See <Panel Color Coordinate> (page 63).
9 When set to "ON", the illumination color of
the screen and buttons changes one after
another.
p Select an illumination color of receiver
buttons. ( Green)
"Green": Green
"Red": Red
13
14
15
11
12
q Returns to the "System Setup 2" screen.
w Moves to the "System Setup 4" screen.
e Sets the Preout output. (Settable only when
in Standby mode)
"Rear" : Rear sound is output.
"Sub" : Subwoofer sound is output.
r Sets the function of the [NAV] button.
"V. OFF" : Press the [NAV] button for more
than 1 second to turn the display
off.
"R-CAM" : Press the [NAV] button for more
than 1 second to switch to rear
view.
t Set to "OFF" if you want to retract the car
antenna when you are not listening to the
tuner source. (Function of Type M/Type M2)
(Settable only when in Standby mode)
17
18
16
y Returns to the "System Setup 3" screen.
u Selects a picture display time. ( "Long")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
i Switches the background video output
signal. Select from "NTSC" or "PAL".
Panel Color Coordinate
Sets the screen and button illumination color.
1 Display the Panel Color Coordinate screen
See <System Setup> (page 62).
2 Select a color
1
2
3
1 Sets to the touched color.
2 Sets and registers favorite color.
3 Returns to the "System Setup 2" screen.
To register your original color
1 Start the RGB coordinate
Next page 3