Filter
Top Products
— 23 —
Audio effect control features
<When the KDS-P901 is connected>
XOVER
AUD
DISP
NAME.S
MENU
NF
3-D
DAB
PWR
OFF
DSP
¢
AUD/Q
FM
4
AM
XOVER
S.A
#1-6
38
AMEAUTO
Setting value
Selecting mode
The following operation allows separate sound sources to
control the output of the front and rear speakers.
Setting the Dual Zone function:
Press the S.A button for at least one second to enter the Dual
Zone System setup mode.
Each time you press the 38 button, the mode switches as
follows:
"ON" : The dual zone system function is on.
"OFF" : The dual zone system function is off.
Don’t turn the Dual Zone system ON if discs are played that
were recorded by DTS. If it is set ON, the disc’s sound won’t
be output.
Setting the Dual Zone Speaker:
You can select whether to output KDS-P901(AUX) sound from
the rear or from the front.
Each time you press the FM or AM button, the mode switches
as follows:
"Normal" : KDS-P901(AUX) sound send to the rear speaker.
"Reverse" : KDS-P901(AUX) sound send to the front speaker.
This mode is available during the Dual zone system is on.
NOTE
NOTE
Dual Zone System
Z910DVD(K)_U.S 02.12.13 6:42 PM Page 23