Kicker DXA1500.1 Car Amplifier User Manual


 
3
12V
Model External Fuse
(sold separately)
Power/Ground Wire KICKER Wiring Kit
DXA250.1 1 x 40 Ampere 8 Gauge PK8, ZCK84
DXA500.1 1 x 80 Ampere 4 Gauge PK4, CK44, ZCK44
DXA1000.1 1 x 150 Ampere 4 Gauge PKD1, PWB050
DXA1500.1 1 x 150 Ampere 4 Gauge PKD1, PWB050
battery
external fuse
remote turn-on
(see page 5)
bare-metal
chassis ground
≤18”
(45cm)
≤24”
(60cm)
Install a fuse within 18” (45cm) of the battery and in-line with the power cable connected to your amplifi er. If you
ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the last
wire disconnected from the amplifi er--just the opposite as when you installed it.
woofer
MONO OPERATION
minimum impedance of 2 ohms
source unit
high-level speaker
outputs
to amplifi er
shield
+
core conductor
KICKER KISL (optional)
from source unit high-
level speaker outputs
OR
to amplifi er
2014 DXA Mono Amps Rev B.indd 32014 DXA Mono Amps Rev B.indd 3 8/2/2013 3:12:19 PM8/2/2013 3:12:19 PM