Kicker ZXSUM8 Car Stereo System User Manual


 
2
ZXSUM8
ZXSUM8 SUMMING INTERFACE
Owner’s Manual
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Max Voltage In 40V RMS
Max Aux-In Voltage 40V RMS
Max Voltage Out (Channel 1–3) 9V RMS
Max Voltage Out (Channel 4) 6V RMS
Signal-to-Noise Ratio (Channel 1–3) 90dB (ref. 1V)
Signal-to-Noise Ratio (Channel 4) 90dB (ref. 1V < 200Hz)
Remote Attenuation Range 0dB to -27dB
Frequency Response +0 / -1 20Hz–22kHz
Gain Range (Channel 1, 2, 3, 4) -30dB to +4dB
Gain Range (Aux-In) -65dB to +18dB
Fuse 2 Amperes
Width 10-1/2” (265mm)
Depth 5-3/4” (146mm)
Height 1-3/8” (35mm)
Pro Tip: To get the best
performance from your new
KICKER gear, use genuine
KICKER accessories and
wiring.
The ZXSUM8 is a unique interface with the ability to sum (or mix) multiple high-level/speaker-level signals together
to a single, low-level RCA output. The ZXSUM8 greatly simplifi es upgrading or adding an amplifi er (or amplifi ers)
to your factory source unit. Channels 1–4 can be independently switched internally to function as stereo line
output converters (LOCs) instead of the summing function.
Features
4 stereo speaker-level inputs
4 line-level stereo RCA outputs
1 stereo RCA aux-input
Balance levels from multiple speaker-level sources
Sums up to four speaker-level stereo pairs down to a single stereo RCA low-level output
Each stereo channel is capable of both summing and line-output conversion; switched internally
Integrates portable media direct to your amp using aux-in and level control
2010 ZXSUM8 RevC.indd 22010 ZXSUM8 RevC.indd 2 12/28/2009 11:19:00 AM12/28/2009 11:19:00 AM