Filter
Top Products
8
KDS-MP1 - Connecting the KDS-MP1
4 Connecting the KDS-MP1
Always switch off the power to each device before connecting it to
your KDS-MP1. After connecting your KDS-MP1, connect its power
and then switch on the power to each device.
To connect the KDS-MP1, as illustrated in the example in Figure 2, do the
following:
1. Connect the acceptor to one of the following outputs. The:
HDMI connector to an HDMI acceptor (for example, an LCD display)
VGA 15-pin HD connector to a VGA acceptor (for example, a VGA
display)
A/V 3.5mm mini jack to an analog A/V acceptor (for example, a
composite video display with audio)
2. Connect the Ethernet RJ-45 connector to the Network via CAT 5 cable.
3. If required, connect a USB memory stick to the USB connector (see
Sections 7.2.2 and 8).
4. Connect the power adapter to the 12V DC socket on the KDS-MP1 and to
the mains electricity (not shown in Figure 2).
!