Filter
Top Products
VM-22H - Overview
5
Figure 1: VM-22H 2x1:2 HDMI Switcher/DA
#
Feature
Function
1
5V DC
+5V DC connector for powering the unit
2
HDMI OUT2 Connector
Connects to the HDMI acceptor 2
3
HDMI OUT1 Connector
Connects to the HDMI acceptor 1
4
HDMI IN 2 Connector
Connects to the HDMI source 2
5
HDMI IN 1 Connector
Connects to the HDMI source 1
6
REMOTE IR
The yellow LED illuminates when receiving signals from the
Infrared remote control transmitter
7
EDID SETUP Button
Press briefly to determine the type of EDID stored in the non-
volatile memory. Press and hold to select the desired EDID
setup and then release to acquire EDID (see Section 5)
8
IN SELECT Button
Press to select the input. The relevant IN LED illuminates
9
IN 1 LED
Illuminates when input 1 is selected
10
IN 2 LED
Illuminates when input 2 is selected
11
OUT 1 LED
Illuminates when output 1 is connected and active (also
illuminates or blinks during EDID setup, see Section 5)
12
OUT 2 LED
Illuminates when output 2 is connected and active (also
illuminates or blinks during EDID setup, see Section 5)
13
ON LED
Illuminates when receiving power