Filter
Top Products
V IBE OWNER’S MANUAL — 1
F EATURES AND CONTROLS
VIBE232/242/252/262/292
High
Level
High
Pass
Mode
Low
Pass
Bass
Boost
Remote
R
L
Line
Out
Line
Input
Min
Max
40Hz 3kHz
Full
Low
40Hz
350Hz
On
Off
PWR
PROT
R
L
P OWER & P ROTECTION I NDICATORS
Provide instant information on status of amplifier,
including short-circuit and thermal overload alerts.
R EMOTE CONTROL
B ASS BOOST CONTROL
Increases sound level in lower frequencies by 18dB.
LOW PASS FILTER
When Crossover Mode Selector is in Low Pass Mode,
this control limits the frequencies which will be
distributed to the speakers to those below the value
to which this is set within the range 40-350Hz.
C ROSSOVER M ODE S ELECTOR
Determines the mode of built-in crossover:
low pass (permits only low frequency signals to
pass to speakers), high pass(permits only high
frequency signals to pass to speakers), or flat.
HIGH PASS FILTER
When Crossover Mode Selector is on High Pass Mode,
this control limits the frequencies which will be
distributed to the speakers to those above the value to
which this is set within the range 40Hz-3kHz.
I NPUT LEVEL C ONTROLS
Enables the matching of input levels to the
output levels from the head unit (or other
signal source).