Filter
Top Products
P / N : 570-111804-01
Page. 5
WIRE CONNECTION
CAUTION : DO NOT GROUND ANY SPEAKER WIRES TO CHASSIS (-).
REMOTE CONTROL
a) Initial installation after all wiring is completed.
b) Abnormal operation is encountered such as numberic indication on display is erratic.
c) Whenever the reset button is activated, all preset memory content will be erased and must be reprogrammed.
25. RESET BUTTON
This RESET button is recessed in order to prevent accidental engagement, and can be activated with the tip of a ball-point pen
or any similar pointed object. This reset circuitry is provided in order to protect the unit's microprocessor, and should only be
activated under the following conditions:
23. REWIND/FAST FORWARD BUTTON
When tape mode is selected, at the end of tape in fast forward or rewind, the unit will automatically select play mode. To release
either fast forward or rewind button from the lock position, push in the other button approximately half-way. During cassette play,
press the fast forward and rewind buttons simultaneously and the reverse side of the tape will play automatically.
24. SLIDE DOWN EJECT BUTTON
Press this button to let the panel slide down from vertical position to horizontal position. The disc slot is shown. To put the panel
back to origional position, use your fingers to push up the panel upwards until the panel is locked in vertical position.