Filter
Top Products
6
INSTALLATION
Note:
1. In Fig. 1, first remove the two screws that locket the unit core, then put the
transparent glass cover board on the DVD unit, last embed four claspers into the
holes to fix the cover board.
2. In Fig. 2, first attach the brackets on both sides of unit with screws (M4x5), and
then install the unit with screws (M5x25).
3. When fix the unit, you can slide the screw (M5x25) to left side or right side to meet
your needed position. In Fig. 2, select 1 and 3 position to fix the bracket, and you
can also select 2 and 4 position to fix the bracket.
Fig. 1
SCREWS LOCKED THE UNIT CORE
TRANSPARENT GLASS COVER BOARD
CLASPER
CLASPER
Fig. 2
SCREW
M4x5
1
2
3
SCREW
M5x25
SCREW
M4x5
1
2
3
4