Filter
Top Products
IB-CD57-FD-E-063004
PROGRAMMED PLAY
During programming, the word
PROG
(program) flashes in the display. To
program songs to play in your preferred order, follow steps below:
1.Press the PROGRAM button.
Track number
3.Press the PROGRAM button to
confirm. The track 3 is now
programmed.
Program #2 will now show in the
display, ready for your next
selection of track.
4.Repeat steps 2 and 3 to program
other tracks till you finish (up to
20 selections).
5.After programming is finished,
press PLAY to begin programmed
play. The word
PROG
shows in
the display and music begins.
6
The tracks (songs) on the disc can be programmed (arranged in advance)
to play in any order you prefer (up to 20 tracks can be programmed).
Program number
NOTE:
-The player will stop automatically
after all programmed tracks have
been played.
-To quit programmed play, press
STOP button once. Then you may
press PLAY button to re-start
normal play.
PROG
PROG
2.Press the SKIP/SEARCH button
(
or ) to select track number
3 (example). the
“PROG”
and “ ”
will flash in the display.
PROG
Your programmed memory will
be lost:
•
When the power is off, or the CD
Door is opened.
•
When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
The word
“PROG ”
and “ ” will
flash in the DISPLAY.
Programming Example
Program Number
Track Number (song number) 3
1 2
5
3
8
4
1
5
2
6
4
7
1
8
1
etc.
etc.
IB-CD57-FD-E-063004.P65 7/1/2004, 4:06 PM7