Filter
Top Products
INSTALLATION MENU
6
INSTALLATION MENU
ENTERING THE INSTALLATION MENU
With an LG installer remote, press and hold down the
Menu key for five seconds. The TV screen will show
the Enter Password display.
Key in “1-1-0-5” and press
EENNTTEERR
button. This is
the initial password. The password can be changed as
required.
The feature set up available on this LG commercial TV which features ‘TV link’ are shown on the ‘Installation
Menu ’. This simple menu is designed to make it easy and efficient for the system integrator to install and set up
the institution’s communications system.
Public Display Mode controls operation and functionality of the TV. Once set up, these settings are clonable; they
can be copied and transferred to another identical TV. See the TV Link-Loader section for cloning details.
EZ Scan
Manual Scan
Channel Edit
DTV Signal
Input Source
Input Label
Set ID
2
1
Use the
DD
or
EE
button to select the Public Display
Settings option and press the
GG
button.
Once in the Public Display Settings menu, use the
DD
EE FF GG
button to select and adjust the menu options
to your requirements. If you want Public Display mode
to be enabled, select ‘Yes’ for that option.
4
3
Press and hold the
MMOODDEE
button for more that 3
seconds. The TV will automatically display the
Installation Menu after about 5-7 seconds.
1
Installation Menu (V1.0)
Public Display Settings
G
TV Link-Loader
G
Password Change
G
Set ID setup
G
Enter Password
** **
Accessing the Installation Menu with
the Menu Button
Accessing the Public Display Mode Menu
Accessing the Public Display Mode
Menu with the Mode Button