Filter
Top Products
25
ENG
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
Do not insert screws to four holes for
assembling the stand when installing the TV
to the wall.
On the 47LT770H and 47LT777H models,
use M6 x L51 screws.
NOTE
A wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
Use only screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
supplied with the wall mount.
Tidying Cables
For 32/37/42LT670H, 32/37/42/47LT770H,
32/37/47/47LT777H
1
Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
Power Cord Holder
2
Gather and bind the cables with the cable
holder.
Cable Holder
For 26LT670H, 26LT673H
1
Gather and bind the cables with the cable
holder.
Cable Holder
Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
CAUTION