Filter
Top Products
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
http://www.kensington.com
.
Connect the Kensington security system cable
between the Monitor set and a table.
The Kensington security system is optional.
You can obtain it from most electronics stores.
NOTE
WARNING
• When adjusting the angle of
the screen, do not put your
finger(s) in between the head
of the monitor and the stand
body. You can hurt your
finger(s).
• When adjusting the height
of the screen, do not put
your finger(s) in between the
head of the monitor and the
stand base. You can hurt your
finger(s).
ERGONOMIC
• It is recommended that in order to maintain an
ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not
exceed 5 degrees.
WARNING
• You do not need to replace the Locking pin after
it is removed,to adjust its height.