Filter
Top Products
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
2
Connect the Power Cord to a wall outlet.
3
Press (Power) button on the bottom switch
panel to turn the power on.
10 cm
10 cm
10 cm
10 cm
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
Tilt from +15 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
CAUTION
NOTE
Front
Rear
5 - 51
•
Swivel Range : -45°~45°(+/- 2°)
-45° ~ 45°(+/- 2°)
•
Height Range : maximum 5.12 inch (130.0 mm)
* Please be sure to
remove the Locking pin
to adjust the height.
130.0 mm