Filter
Top Products
10
CAR CD/MP3/WMA Receiver
For Light setting
You can adjust the light effects by adjusting LED, DIM, or DIM L.
LED COL1/ COL2/ AUTO: You can change the LED window color.
DIM(Dimmer) OFF / ON / AUTO : You can change the brightness of the dis-
play window during the power-on status. When you set DIMMER to AUTO,
the dimmer operates according to the car dimmer setting.
DIM L (Dimmer Level): When you set DIM to ON/AUTO, you can adjust the dim-
mer level. (-2,-1,0,+1,+2)
For Other setting
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
A-EQ(Auto EQ) ON/OFF
AUTO EQ operates only in the music file supported with Genre in the device.
When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automati-
cally selected according to the music genre.
SW(Subwoofer) OFF / SW 55 Hz / SW 85 Hz / SW 120 Hz
You can enable the subwoofer.
SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120 Hz.
DEMO OFF/ ON
You can change the initial indication on the display to information name (func-
tion name, EQ name, etc...) while listening to a source.
CLK(Clock)
For the model RDS is not supported or even for a RDS supported unit, when
RDS CT information is not received and then you set CT on the setting menu
to OFF, you can adjust the time by yourself. Refer to the page 12 for setting
the CT(Clock Time) ON/OFF.
Listening to a CD - more you can do
Pausing or restarting CD playback
1. Press
BB
[]
on the player (
BB
/
[]
on the remote control) during playback.
2. Press it to resume playback.
Searching for a section within a track / file
1. Press and hold b?- or +?B on the player (m or M on remote control) for
about 1 second during playback.
2.
Press
BB
[]
on the player (
BB
/
[]
on the remote control) at the point you want.
Skipping to another track/ file
Press b?- or +?B on the unit (m/M on remote control.).
Or
1. Press the volume knob or ENTER on the remote control.
2. Rotate the volume knob on unit or press
v or V on the remote control to
select a desired track or file.
3. Press ENTER (Or the volume knob) to start playback.
Note
To skip to previous track, press briefly b?- within 3 seconds of playing time.
Checking information about your music
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album.
Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no
information, “NO TEXT” will be shown in the display window.
Listening to a CD
ON PLAYER ON REMOTE
1. Insert a CD.
2. Adjust the volume.
-
Rotate
the
volume knob
VOLUME