Filter
Top Products
20
On Screen Display(OSD) Selection and Adjustment
Press the , buttons to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. The white balance function is
executed only for RGB input.
SETUP
M E N U : Exit
: Adjust
: Adjust
AUTO/SET
: Select another
sub-menu
Main menu Sub menu Description
RGB input
HDMI input
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
LANGUAGE
OSD
POSITION
WHITE
BALANCE
OVERSCAN
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for RGB input)
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Restore all factory default settings except
"LANGUAGE."
FACTORY
RESET
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.