![](http://pdfasset.owneriq.net/2/ad/2adccf87-28a1-44e6-89ac-fe9dda39c57a/2adccf87-28a1-44e6-89ac-fe9dda39c57a-bg1.png)
1
FIGURE 1
STEP 1:
• CARELFULLY remove the LEFT PRESS HANDLE, two 1/2” FLANGE BEARINGS, one 3/8” WASHER, and one 3/8” LOCK NUT
from the PRESS ARM (8) as shown in FIGURE 1.
!! IMPORTANT !!
PLEASE FOLLOW THESE INSTRUCTIONS TO ASSEMBLE
THE PRESS ARM PIVOT SPACER TO THE PRESS HANDLE.
Revision: 4/25/02
220 GYM SYSTEM ADDENDUM INSTRUCTIONS
• Assemble the LEFT PRESS HANDLE, two 1/2” FLANGE BEARINGS, one 3/8” WASHER and one 3/8” LOCK NUT to the PRESS
ARM as shown in FIGURE 1. (IMPORTANT! Do not overtighten! PRESS HANDLE should rotate freely.)
• Repeat STEP 1 to assemble the PRESS ARM PIVOT SPACER (1) to the RIGHT PRESS HANDLE.
PART #
7258801
KEY
1
QTY
2
DESCRIPTION
PRESS ARM PIVOT SPACER
PARTS LIST
1
PRESS ARM
PRESS HANDLE
1/2” FLANGE
BEARINGS
3/8” LOCK NUT
• Slide one PRESS ARM PIVOT SPACER (1) over the ROLL PIN on LEFT PRESS HANDLE as shown in FIGURE 1.
ROLL
PIN
Part #7282301
Rev A.