Linear M3300CD Car Stereo System User Manual


 
11
CD Player
Signal/Noise Ratio ............................... > 60 dB
Frequency Response ............... 20 Hz – 20 kHz
Channel Separation .............................. > 62 dB
FM Tuner
Tuner Range ........................ 87.5 – 107.9 MHz
Usable Sensitivity ................................. 5 dBuV
Stereo Separation @ 1 kHz ..................... 28 dB
AM Tuner
Tuner Range ........................... 530 – 1710 kHz
Usable Sensitivity .................................... 30qV
General
Operating Power ...... 12 VDC, Negative Ground
Maximum Power Output .............. 4 x 45 Watts
RMS Power ................................. 4 x 19 Watts
RCA Line Out ...... Low-Level Outputs - 1000MV
Output Impedance
..
Compatible 4-8 Ohm Speakers
Fuses .....................................................15 amp
Dimensions ...... 178 (w) x 178 (d) x 51 (h) mm
Specifications are subject to change without notice.
Specifications
Final Installation - Method B
1
3
3
2
2
5
4
Installing the Unit
1: Screw holes on the side of the unit.
2: Screws. Use wither truss screws (5 x 8mm) or
flush surface screws (4 x 8mm), depending on
the shape of the screw holes in the bracket.
3: Vehicle’s factory mounting bracket.
4: Dashboard or console.
5: Hook (Remove this part).
Note: The mounting sleeve, outer trim ring, and
the mounting strap are not used for this method of
installation.