Filter
Top Products
Inserting and Ejecting a Disc
Pull the tab at the top of the CD Door, and the
door will open. Push a disc into the CD Slot (20),
label side up, and the disc will begin to play.
Press the EJECT button (16) to stop CD play
and eject the disc. The disc will also eject auto-
matically when the CD Door is opened.
Select Tracks
Press the or button (5) to move to the
previous track or next track. The track number
appears in the Display Area.
Fast Forward and Fast Reverse
Press and hold the or button to fast for-
ward or fast reverse. Disc play starts from when
you release the button.
Pause Disc Play
Press the button (18) to pause the CD
player. Press it again for several seconds to
resume play.
Repeat the Same Track
Press the button (9) for several seconds to
continuously repeat the same track. Press it again
for several seconds to stop repeat.
Play All Tracks in Random Order
Press the button (10) for several seconds
to play all tracks on the current disc in random
order. Press it again for several seconds to stop
random play.
Intro Scan
Press the button (11) for several seconds
to play the first 10 seconds of each track. Press it
again for several seconds to cancel the function
and listen to the track.
Program CD Tracks
Use the Program function to select up to 32 CD
tracks to play in any order. The Program function
allows you to select a track number for each spot
in the playing sequence. A CD must be inserted to
use the Program function.
1. Press the button (8) for several seconds to
enter Program mode. PGM starts flashing and
the “P-01” appears in the display.
2. Press the or button to choose a track
number. Then press the button (7) to
memorize it. Select the next track and it will
memorize will be “P-02”.
Repeat these steps to program tracks in the
desired order. Then press the button for
several seconds to play the CD in programmed
order. When you have programmed 32 tracks,
“FULL” will appear in the display.
• When the CD is played in programmed order,
press the button for several seconds, then
press it again for several seconds to exit the PGM
mode.
• When the CD is playing in programmed order,
pressing the button for several seconds
will clear all the programmed content and “CLR”
will appear in the display.
• If you don’t press the button (7) to carry
out program setting, press the button (8)
for several seconds, “NO-P” will appear in the
display.
Direct Track Access
While a CD music disc is playing, the station
recall buttons 0 thru 9 can be used to access and
play CD tracks directly (no need to scan or
advance the tracks manually one-by-one to find
the one you want to listen to). If you know the
music track number you want to listen to, press
the station recall button(s) that correspond to the
desired track.
For example, if you are listening to track “1” and
you want to hear track “3”, press button.
“T-03” will be displayed and track 3 will begin to
play.
If the music track you want to listen to has a dou-
ble digit number such as “15”, press and
then press . The display will show “T-15”
and track “15” will begin to play. You can direct
access any track at any time.
Note: If you select a track number that does not
exist on the CD, “NO TR” will be displayed. Select
another track.
Track/Time Display
To display the running time/remaining time of a
track, press the ELAPSE button (14).
AS/PS
5 RDM
1
3 PGM
3 PGM
2 MEM
2 MEM
3 PGM
3 PGM
2 MEM
3 PGM
6 INT
5 RDM
4 RPT
6
CD Player Operation