Important Safeguards
1. Read Instructions: All the safety and operating instruc-
tions should be read before operating any of the compo-
nents in the Movievision
TM
system.
2. Retain Instructions: The owners manual should be
retained for future reference of operation. Leave this man-
ual in the vehicle.
3. Follow Instructions: Failure to follow the operating proce-
dures enclosed may result in unsatisfactory performance
of the system, premature component failure, injury to the
user and void the warranty from misuse, abuse and lack
of periodic maintenance.
4. VCR Service: Do not remove the cover on the VCR unit.
There are no user serviceable parts inside. Refer servicing
and repair to a qualified VCR technician.
5. TV Screen : Do not remove or disassemble the TV screen
housing or related parts. There are no user serviceable
parts inside. The TV screen housing contains a High
Voltage power converter circuit that is dangerous and can
be serviced only by a qualified technician.
6. VCR Power Source Requirement: The Movievision
TM
VCR
is designed to operate from 12 volt DC automotive battery
systems only. Do not attempt to connect this unit to a
household wall socket or a 110 volt automotive step-up
converter. Irreparable damage will occur and the
warranty will be voided.
A. If objects or liquid has been spilled into the cabinet or into
the tape opening.
B. If the system does not operate normally by following the
operating instructions illustrated in this manual.
Damage Requiring Service
7. Ventilation: Slots and openings in the cabinet of the VCR
are provided for ventilation to insure reliable operation of
the product and prevent it from overheating. These slots
and openings must not be blocked or covered at any time.
8. Object and Liquid Entry into the VCR: Never push metal
objects of any kind into the tape slot of the VCR as they
may touch electrical contact points and cause a short
circuit. Never spill any liquid on or inside the VCR.
9. Ambient Temperature: The TV screen and the VCR have been
designed to operate in a wide range of hot and cold environ-
ments. However, it is recommended that the temperature
inside the vehicle should be maintained before attempting to
operate the TV or VCR.
10. Heat: The product should be situated away from heat source
devices such as amplifiers or other products that produce
heat.
11. Wiring Harnesses: The harness should be routed in such a
way that it is not likely to be stepped on, have objects placed
on it, or hinder operation of a vehicle in any way.
C. If the VCR has been kicked and the fascia has been broken.
D. When the video product exhibits a distinct change in per-
formance, this indicates a need for service or repair.
Damage Requiring Service: Refer the Movievision
TM
system to qualified service personnel under the following conditions:
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates the presence of
high voltage in the unit. It is dangerous to
make any kind of contact with any inside
part of this product.
This symbol alerts you that important lit-
erature concerning operation and main-
tenance has been included with this
product.
CAUTION
FCC REGULATIONS STATE THAT ANY UNAUTHORIZED
CHANGES OR MODIFICATIONS TO THIS EQUIPMENT MAY
VOID THE USER’S AUTHORITY TO OPERATE IT.
IMPORTANT: One federal court has held that unauthorized
recording of copyrighted TV programs is an infringement of
U.S. copyright laws.
Certain Canadian programs may be copyrighted and any
unauthorized recording in whole or in part may be violation
of these rights.
To prevent damage which may result in fire or electric
shock hazard, do not expose this appliance to rain or mois-
ture.
2
MV-VCR102UM 1/17/02 10:01 AM Page 2