Filter
Top Products
8
GB
POSITIONING AND SECURING THE SPEAKER SYSTEM (FIG. 1)
Use the mounting positions provided in your vehicle. If the speakers do not fit, they can
be placed in the rear window shelf.
Fig. 1
(1) depth
(2) driver diameter
Fig. 1a
(1) use mounting ring to mark position of speaker opening and fastening holes
(2) cut out opening and drill holes
Make sure that the subwoofer is secured in such a way that it cannot slip or slide.
Use the screws provided for this purpose. Damage resulting from sudden changes
in speed (e.g. hard braking) is not covered under the terms of our guarantee.
CONNECTING TO THE RADIO / AMPLIFIER (FIG. 2)
The speaker system should preferably be connected to an external power amplifier. This
can provide the required electrical power and create corresponding dynamic
reserves. The relevant instructions also contain the customized connection diagram for the
operation of a speaker system.
Should you not have a power amplifier, the speakers can also be connected directly to the
radio. The relevant operating instructions also contain the connection diagram for this
situation.
Please note that only limited dynamic reserves will be available in this case.
Excessively low outputs combined with high distortions can destroy your speakers.
TWEETER PROTECTION POLYSWITCH
There is a protective element integrated into the crossover of your XCESS tweeter, which
has high impedance in cases of overload and reduces the current flowing through the
tweeter. If the tweeter is deactivated, please turn down the volume and wait for a
moment. After cooling down, the tweeter will re-activate and is ready for operation again.