14 M-LCD7-HDMI Manual
Troubleshooting
■ Only black and white image
Adjust the levels of color saturation and brightness
■ Power on but no picture
Make sure the AV and VGA cable are secure from the video out connector & VGA signal
output connector. Make sure you are using the standard power adapter included with the
monitor.
■ Wrong or abnormal colors
If any color is missing, check the cables to make sure they are securely connected. Broken
or loose pins in the cable connector can cause a bad connection.
■ Remote control doesn’t work
Check that the battery is installed properly. Also make sure the battery is not low. Make sure
the signal is not being blocked by obstructions.
■ Battery drain while the monitor is off
Unplug the battery cable
Remove the battery
■ Other problems
If intermittent image occurs, it may be that the VGA signal frequency isn’t matched with
normal standard.
It is a normal for some bright lines to appear on screen when you turn the unit.
Troubleshooting