Marshall electronic V-R171X-IMD-HDSDI Car Video System User Manual


 
26
Specifications
PANEL
Screen Size 17” Diagonal
Display Area (h x v) 367.20 x 229.50 mm
Aspect Ratio 16:10 Native (4:3/16:9 Modes)
Pixels 1920 x RGB x 1200
Viewing Angle (h x v) 140° x 120°
Brightness 400 cd/m
2
Contrast Ratio 600:1
Dot Pitch (h x v) 0.064 x 0.191 mm
Pixel Pitch (h x v) 0.191 x 0.191 mm
VIDEO INPUT/OUTPUT
HD-SDI Input / Output
Supports ITU-R BT.656, SMPTE 259M, 292M, 274M
CONNECTORS
HD-SDI Video Input
1 x BNC Female (75 )
HD-SDI Video Output (Active Loop-Through)
1 x BNC Female (75 )
Power Input
2-Pin Twist Lock Connector
Tally Hardware Interface
HD-15 Female
RS-422/485 Interface
2 x RJ12 (Modular 6P6C)
TALLY HARDWARE INTERFACE (HD-15)
Activation requires contact closure of pin to ground on the
HD-15 connector:
Pin No. Signal
1 Green
2 Red
3 Yellow
4 N/C
5 Ground
6 N/C
7 N/C
8 N/C
9 N/C
10 N/C
11 N/C
12 N/C
13 N/C
14 N/C
15 N/C
RS-422/485 SERIAL INTERFACE (RJ12)
Protocols: Image Video, TSL v4.0, MEI
Pin No. Signal
1 Tx-
2 Ground
3 Rx+ (Receive from host)
4 Rx- (Receive from host)
5 N/C
6 Tx+
ELECTRICAL
Power Consumption 5.0A @ 12VDC (60 W)
Voltage Requirement 12 VDC
V-PS12-5V-1 Power Supply:
Input 100V-240V, 2.5A, 50-60Hz
Output 12-17VDC, 5A, 60W Max
MECHANICAL
Dimensions (w x h x d): 18.9” x 10.45” x 1.40”
Weight (with rack ears): 5.10 lbs
Operating Temperature 32°F to 120°F (0°C to 50 °C)
Storage Temperature -4°F to120°F (-20°C to 50°C)
Compliance Œ, FCC-Class A, ANSI-63.4
(Certificates on file)
RoHs Do not dispose. Return to
Manufacturer or Authorized
Recycle Facility.