Filter
Top Products
• Composite PAL/NTSC (ITU-R BT.470/SMPTE170M)
• Active loop through is available for all analog signals
• Small Footprint – occupies only 4RU of a standard EIA 19 inch rack
• Ready to mount – all brackets are factory installed
• Lightweight – 75% lighter than CRT models
• All adjustments and selections are readily available. No menus!
• Settings memory restores active state with power off/on cycle
• Easy to use front panel selection of inputs
• NTSC or Pal operation with automatic signal format detection
• All inputs automatically terminate
• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)
• Three LEDs (Red, Green, Amber) produce 7 different tally indications
• Unique 180 degree tilt adjustment
• Dry erase label for each screen
1
Product Overview
The Rack mounted and tiltable V-R82DP-2C represents leading edge technology in LCD imaging for broadcast and profes-
sional video applications featuring High Resolution, 1.2 megapixel, TFT screens with completely digital signal processing.
NTSC and PAL composite video standards and signal types are accepted and displayed on each screen of this model. Analog
signals are digitized using an advanced 10 bit process on each signal path with 4x over sampling and adaptive 5 line comb
fi lter with exacting color space conversion. All video formats are scaled to fi t on screen in the highest resolution using a state of
the art LSI that incorporates 4x4 pixel interpolations with precision Gamma correction to produce the best images available.
2
Features
Analog and Digital Screen Formats and Frame Rates
All signal types and frame rates are automatically detected
• 525 –60i / 625 - 50i (Interlaced NTSC/PAL)
V-PS12-5V-1
Universal power supply
(U.L. class 2)
4 RU
7”
17.8 cm
3
Electrical Specifications
Number of Screens 2
Screen Aspect 4:3 / 16:9 switchable from front panel
Display (Viewing Area) 8.4” (6.71”H × 5.03”V) (170.4mm x 127.8mm)
Viewing Angles
120 ̊ H x 100 ̊ V
Resolution (RGB Dots) 800H × RGB x 600V (1.44 million pixels)
Dot Pitch 0.213 mm (H) x 0.213 (V)
Contrast Ratio 350:1
Pixel Response 10ms rise / 25ms fall
Brightness (in cd/m²) 350 cd/m²
Backlight CCFL (Cold Cathode Fluorescent Lamp)
Screen Treatments Anti Reflection, Anti Glare, Hard Coat
Video Formats Standard definition only
System NTSC / PAL auto recognition for standard definition signals
Inputs per display 2 Composite (BNC)
Outputs per display 2 Active Composite loop through (BNC)
Color Gamut SMPTE-C
Power required 12 V D.C. from external U.L. Class 2 power supply (included) max 5.0 AMP
Power Consumption 40 Watt Nominal
Operating temperature
32 ̊ F to 120 ̊ F (0 ̊ C to 50 ̊ C)
Compliance
Œ, FCC-Class A, ANSI-63.4 (Certificate on file)
RoHS WEE / Environmental
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
2
3
V-R82DP-2CV-R82DP-2C Users Guide Users Guide
Marshall Electronics
Dimensions 19.125”W x 2.5”D x 7”H (48.5cm x 6.35cm x 17.8cm)
V-R82DP-2C Weight 5.0 lbs (2.27kg)
V-PS12-5V-1 Power Supply Weight 1 lbs (0.45kg)
4
Mechanical Specifications
5
Operational Setup
1. Unpack the V-R82DP-2C and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may have
occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you
are not located within the continental United States call +1 310-333-0606.
2. After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required
when installed to prevent possible damage to the V-R82DP-2C internal components.
3. Connect required cables for signal input and output.
Please note that power must be applied to the V-R82DP-2C for all outputs to be activated.
All BNC connectors should be rated for 75Ω.
4. Plug the V-PS12-5V-1 power supply into the A.C. source
5. Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.
6. Turn on the V-R82DP-2C by depressing the power switch located on the front of the unit.
6
Connectors
* Composite Video Inputs comply to SMPTE-170M
* Composite Video Outputs Require Power to be applied for activation
* Tally lamps active when connected to ground
Monitor 2
Composite Video In
Channel 1 and 2
Pin1-M1Grn
Pin2-M1Red
Pin3-M1Yel
Pin4-Gnd
Pin5-Gnd
Pin6-
Pin7-
Pin8-
Pin9 -Gnd
Pin10-Gnd
Pin11-M2Grn
Pin12-M2Red
Pin13-M2Yel
Pin14-Gnd
Pin15-Gnd
Tally IN
DB-15 Female
12 VDC from
V-PS12-5V-1
power supply
Left Pin - Pos
Right Pin- Neg
Monitor 1
Composite Video In
Channel 1 and 2
Active Outputs require power to be applied.
All input signals appear as output signal.
Analog output signals are buffered
and amplifi ed.