Filter
Top Products
PVL216 / PVL268 / PVL269
PREMIUM
Flush Mount Method
Mounting Brackets
Mounting Bracket Screws
Mounting Bracket Washers
Mounting Surface
Surface Angle Mount Method
Cup Mounting Screws
Mounting Surface
Top Mounted Method
Cup Mounting Screws
Mounting Surface
Tweeter Mounting Options Separate From Mid Bass (Component)
Tweeter Mounting In The Center Of The Mid Bass (Coaxial)
Grille
Tweeter Assembly
Wires
Tweeter Post
Lock Washer
Guide Pin
Indents
Guide Pins
Screw
Bottom View Of
Tweeter Assembly
1. Place the tweeter grille onto the
tweeter assembly to prevent
damage to the delicate silk dome
2. Route the red & black tweeter
wires through the opening in the
top of the tweeter assembly
3. Line up the 4 guide pins on the
tweeter post with the 4 indents
on the bottom of the tweeter
assembly
4. Fasten the tweeter post to the
tweeter assembly using the
provided screw and lock washer
1. Un-screw the phase plug by turning
counter-clockwise and remove
2. Route the tweeter wires through the
center of the speaker until they come
out the back of the speaker
3. Screw the tweeter post assembly
clockwise until snug
Phase Plug
Tweeter Post
Assembly