Filter
Top Products
2
95-7326 KIT ASSEMBLY
B
C
CUT OUT BAR
CUT HERE
A
DOUBLE DIN RADIO PROVISION
Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate.
(Figure B)
2
Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly using
the screws supplied with the radio.
(Figure C)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Cut and remove the bar in the factory
radio trim panel.
(Figure A)
1
TIP: The smoother the cut, the better
the 95-7326 will look in the dash panel.