Filter
Top Products
2
95-7867 KIT ASSEMBLY
DOUBLE DIN RADIO PROVISION
STACKED ISO MOUNT UNITS PROVISION
Mount the bracket assembly (Removed
in step 6 of dash disassembly) to the
back of the Double DIN Trim Plate
using the factory hardware.
(Figure B)
2
Slide the Double DIN radio or stacked
ISO mount units into the bracket/radio
housing assembly and secure to the
assembly using the screws supplied
with the Double DIN head radio or
stacked ISO mount units.
(Figure C)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Mount the hazard switch to the back of
the Double DIN Trim Plate using the
factory hardware. (Removed in step 7
of dash disassembly)
(Figure A)
1
C
B
A