Filter
Top Products
95-7951 KIT ASSEMBLY
4
DOUBLE DIN MOUNT RADIO PROVISION
CUT
HERE
ON BOTH SIDES
D
B
A
C
E
F
Snap the Double DIN brackets to the out-
side edge of the Double DIN trim plate.
(Figure E)
1
NOTE: For the Chevrolet Aveo 2004-06,
Chevrolet Aveo Hatchback 2007, Pontiac
G3 Hatchback 2007 and Suzuki Verona
2004-07, cut and remove front lower mount-
ing tabs from the Double DIN trim plate
(Figure A). For the Suzuki Forenza 2004-07 and
the Suzuki Reno 2005-07, cut the rear lower
mounting tabs (Figure B).
NOTE: The Verona 2004-2007 sub dash
will need to be trimmed slightly for proper
fit. Refer to illustration.
(Figure C,D)
Slide the Double DIN radio into the brack-
et/trim plate assembly and secure the
radio to the assembly using the screws
supplied with the radio.
(Figure F)
2
Continue to final assembly.
*
Note: Refer also to the instructions included with the aftermarket radio.