Filter
Top Products
4 5
Locate the factory wiring har-
ness in the dash. Metra
recommends using the proper
mating adapters (included)
from Metra and AXXESS to
integrate your new radio. Re-
connect the negative battery
terminal and test the unit for
proper operation.
Mount the ISO Brackets to the
head unit with the screws sup-
plied with the unit. (Fig. A)
Snap the pocket into the bot-
tom opening of the radio hous-
ing. (Fig. B)
Slide the head unit into the ra-
dio opening until the side clips
engage. (Fig. B)
Snap the Trim plate into the
Radio Housing.
Continue to “Audio Wiring”....
Locate the factory wiring har-
ness in the dash. Metra
recommends using the proper
mating adapters (included)
from Metra and AXXESS to
integrate your new radio. Re-
connect the negative battery
terminal and test the unit for
proper operation.
Cut and remove the center
bar from the radio housing.
(Fig.A)
Snap the Double DIN brack-
ets to the inside edge of the
Double DIN trim plate.
Slide the Double DIN head
unit or stacked ISO head units
into the bracket/radio housing
assembly and secure the Dou-
ble DIN head unit or stacked
ISO head units to the assem-
bly using the screws supplied
with the radio. (Fig. B)
1
1
2
2
3
3
4
4
5
A
A
B
FORD TAURUS 2004- 2007 FORD TAURUS 2004- 2007
ISO DIN HEAD UNIT PROVISION
DDIN/STACKED ISO DIN
HEAD UNIT PROVISION
Continued on Pg. 6
99-571999-5719