Filter
Top Products
99-7013 DASH DISASSEMBLY
MITSUBISHI OUTLANDER 2007-2010
2
Remove the labels from the front of
the radio trim panel at each side of
the hazard switch by pushing them
out from behind the panel. (Retain the
labels to be reused during kit prepa-
ration) (
Figure F)
6
E
F
Continued to kit preparation.
REMOVE
“9” PHILLIPS SCREWS
(RETAIN SCREWS)
D
Remove (7) Phillips screws securing
the hazard switch assembly to the
back of the factory radio trim panel.
Unplug the ribbon cable from the
hazard switch assembly and remove
assembly from panel from rear.
(Retain the screws and switch
assembly to be reused during kit
preparation) (
Figure D,E)
5