Metra Electronics 99-7334 Car Stereo System User Manual


  Open as PDF
of 8
 
99-7334 KIT ASSEMBLY
4
A
B
C
DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION
Cut and remove the center bar from
the radio housing.
(Figure A)
1
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Figure B)
2
Snap the Double DIN Trim plate onto
the front of the Radio Housing.
(Figure C)
4
Slide the Double DIN or stacked ISO
mount unit(s) into the bracket/radio
housing assembly and secure the
unit(s) to the assembly using the
screws supplied with the unit(s).
(Figure C)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
 previous next