Filter
Top Products
3
Note: You will need to remove the after-
market radio’s trim ring if equipped.
1. Cut and remove the appropriate tabs
not necessary for your application.
(Figure A)
2. Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure B)
3. Slide the aftermarket head unit into
the cage and secure. (Figure C)
4. Locate the factory wiring harness and
antenna plug in the das
h. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Attach the trim plate supplied with
the kit to the front of the radio
housing assembly. (Figure C)
6. Reassemble dash in reverse order
of disassembly.
Nissan Versa
Nissan Juke
Nissan Juke
99-7610
Figure A
Figure C
Figure B
DIN HEAD UNIT PROVISION