Filter
Top Products
1. Mount the ISO Brackets to the head
unit with the screws supplied with
the unit. (Figure C)
2. Slide the head unit into the radio
opening until the side clips engage.
(Figure D)
3. Locate the factory wiring harness and
antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
4. Attach the trim plate supplied with
the kit to the front of the radio
housing ass
embly. (Figure D)
5. Reassemble dash in reverse order
of disassembly.
Figure C
Figure D
99-7610
5