Filter
Top Products
5
Slide the aftermarket radio unit into
the factory brackets and secure the
unit to the brackets using the
screws supplied with the head unit.
(Figure A)
1
A
B
REMOVE
CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY
REMOVE
CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY
REAR VIEW OF RADIO HOUSING
D
RESTORE
CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY
RESTORE
CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY
REAR VIEW OF
RADIO HOUSING
DOUBLE DIN TRIM PLATE
C
Secure the aftermarket radio unit
and factory bracket assembly into
the sub dash.
(Figure B)
2
DOUBLE DIN HEAD UNIT PROVISION
3
Place the Double DIN trim plate into
the back of the radio housing, then
attach the clock/hazard switch brack-
et assembly using the (4) #6 x 3/8”
Phillips pan head screws.
(Figure C)
WARNING:
DO NOT OVERTIGHTEN SCREWS.
4
99-8214
KIT ASSEMBLY
Continue to Final Assembly.
Clip the clock/hazard switch
assembly into the 99-8214 Radio
Housing Trim Panel.
(Figure D)