Filter
Top Products
99-8715 KIT ASSEMBLY
3
Mount the ISO Brackets to the after-
market radio using the screws sup-
plied with the radio.
(Figure A)
1
Slide the radio/bracket assembly into
the radio housing until it snaps into
place.
(Figure B)
2
Snap the Trim plate onto the front of
the radio housing.
(Figure D)
4
Continue to final assembly.
A
B
C
D
Note: Refer also to the instructions included with the aftermarket radio.
ISO MOUNT RADIO PROVISION WITH POCKET
Snap the pocket into the radio hous-
ing.
(Figure C)
3