Filter
Top Products
The next step is to remove the shifter cover. To do this note the
small notch at the bottom, near the parking brake, insert a regular
screwdriver there to pop it up and then rotate it 90 degrees to take
it over the shifter. The picture on the left shows this process com-
Now, open the cup holder. We are then going to
remove the screws to the left and right of the cup
holder. This frees the top portion of the outer trim
assembly for the center of the dash.
In the two pictures below, I show the two screws
to remove to release the lower portion of the outer
trim assembly. Make certain to keep these 4
screws for use when reinstalling the trim piece.