Filter
Top Products
English-12
Specifications
Monitor Specifications LCD1860NX (L182R4) Monitor Notes
LCD Module Diagonal: 46 cm/18.1 inches Active matrix; thin film transistor (TFT) liquid
Viewable Image Size: 46 cm/18.1 inches crystal display (LCD); 0.28 mm dot pitch;
Native Resolution (Pixel Count): 1280 x 1024 200 cd/m
2
white luminence; 350:1 contrast ratio,
typical.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI
Sync: Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative
Sync on Green (Video 0.7V p-p and Sync Negative 0.3V p-p)
Display Colours Analog input: 16,777,216 Depends on display card used.
Synchronization Range Horizontal: 31.0 kHz to 82 kHz Automatically
Vertical: 55 Hz to 85 Hz Automatically
Image Formation Time 30 ms (Typ.)
Resolutions Supported 720 x 400*
1
: VGA-Text Some systems may not support
640 x 480*
1
at 60 Hz to 85 Hz all modes listed.
800 x 600*
1
at 56 Hz to 85 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 85 Hz
1152 x 870*
1
at 75 Hz
1280 x 1024 at 60 Hz to 75 Hz........
NEC-Mitsubishi Electronics Display cites
recommended
resolution at 60 Hz for
optimal
display performance (Analog Input).
1280 x 1024 at 60 Hz.......................Digital Input
Active Landscape: Horiz.: 359 mm/14.1 inches
Display Area Vert.: 287 mm/11.3 inches
Horizontal: Horiz.: 287 mm/11.3 inches
Vert.: 359 mm/14.1 inches
Power Supply AC 100-120 V/220-240 V @ 50/60 Hz
Current Rating 0.8 A@100-120 V, 0.4 A @ 220-240 V
Dimensions Landscape: 398 mm (W) x 369.5~479.5 mm (H) x 205 mm (D)
15.7 inches (W) x 14.5~18.9 inches (H) x 8.1 inches (D)
Without stand: 398 mm (W) x 342.5 mm (H) x 73.5 mm (D)
15.7 inches (W) x 13.5inches (H) x 2.9 inches (D)
Height Adjustment: 110 mm/4.3 inches
Weight 8.3 kg (18.3 lbs)
Without stand: 6.2 kg (13.7 lbs)
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Feet: 0 to 4850 m/0 to 15,912 Feet
Storage Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 10% to 85%
Feet: 0 to 13600 m/0 to 44,619 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.