NEC SB-L008KU Car Stereo System User Manual


 
14
<Using LAN>
LAN Connection and setting
Introduction
When distributing program data via LAN, LAN connection and setting are required.
There are two methods for setting the IP Address, one for Static IP Address and one using DHCP servers.
In the case of Static IP Address, refer to LAN connection/setting: When using Static IP Address, and when using DHCP server refer to LAN
connection/setting: When using DHCP server.
NOTE:
The DHCP server provides IP Addresses to equipment on the NETWORK. Normally, they are built-in with routers.
The procedure for LAN setting is as follows.
Media Player LAN setting
The Media Player name setting of the
Media Player
(required only in the DHCP mode)
Authoring software LAN setting
LAN connection test
* Not required for Static IP.
Open the OSD of the Media Player using the enclosed remote control and
conduct settings.
From Internet Explorer on the computer, call out the Media Player
setting screen via LAN and conduct settings.
Conduct setting using the panel setting wizard from panel manage-
ment of the authoring software.
To confirm the LAN setting, conduct the connection test.