Niles Audio AT8000 Car Speaker User Manual


 
In traditional wood stud/drywall construc-
tion you can cut the hole for the speaker
and utilize the large hole to auger holes
across, up or down the wall for as far as
your drill bit will take you. If you have
matching paint and take reasonable care in
patching you can cut a hatch in the drywall
at each stud, run your wire, and patch and
touch-up the wall (See Figure 7).
When you are dealing with the unknown
because of the structure of your home, or
with difficult to patch wall materials like
plaster, lath and plaster, faux finishes, wall-
paper etc., be patient. Acareful study of the
potential problems before you start the job
will pay off.
Installation Fundamentals
11
Figure 7