Filter
Top Products
or warranty and may be
dangerous.
For availability of approved
enhancements, please check with
your dealer. When you disconnect the
power cord of any enhancement,
grasp and pull the plug, not the cord.
Charge the battery
The headset has an internal,
nonremovable, rechargeable
battery. Do not attempt to remove
the battery from the headset, as
you may damage the headset.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector on the
headset. The red indicator light
is on while charging. It may
take a while before charging
starts. If charging does not
start, connect the charger again
and retry. Charging the battery
fully may take up to 2 hours.
3. When the battery is fully
charged, the red indicator light
turns off. Disconnect the
charger from the headset and
the wall outlet.
The fully charged battery has
power for up to 7 hours of talk-
time or up to 200 hours of standby
time. However, the talk and
standby times may vary when the
headset is used with different
mobile phones or other compatible
Bluetooth devices, usage settings,
usage styles, and environments.
When battery power is low, the
headset sounds a series of beeps
and the red indicator light starts to
flash.