Filter
Top Products
5
charging. It may take a while
before charging starts. If
charging does not start,
disconnect the charger, plug it
in again, and retry. Charging the
battery fully may take up to
2 hours 30 minutes.
3. When the battery is fully
charged, the indicator light
turns off. Disconnect the
charger from the headset and
the wall outlet.
The fully charged battery has power
for up to 10 hours of talk-time or
up to 195 hours of standby time.
However, the talk and standby
times may vary when used with
different mobile phones or other
compatible Bluetooth devices,
usage settings, usage styles, and
environments.
When battery power is low, the
indicator light flashes quickly.
Switch the headset on or off
To switch on, press and hold the
multifunction key until the
indicator light is displayed.
To switch off, press and hold the
multifunction key until the
indicator light briefly flashes
several times and turns off.
Pair the headset
1. Ensure that your phone is
switched on and that the
headset is switched off.
2. Press and hold the multifunction
key (for about 8 seconds) until
the indicator light is
continuously displayed.
3. Activate the Bluetooth feature
on the phone, and set the phone
to search for Bluetooth devices.
4. Select the headset from the list
of found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may