Filter
Top Products
place the batteries as indicated in the battery compartment, and close
the battery cover by pushing it in place. During long periods where the
speakers are not used, remove the batteries to prevent damage from
battery leakage.
To use the speakers with the AC-4 charger, connect the charger to a wall
outlet, and plug the charger cable to the connector at the back of the
speakers.
Use the speakers
To connect the speakers to the phone or audio device, plug the speaker
cable into the connector on the device. If the phone or audio device has
a Pop-Port connector or a 2.5-mm connector, connect the AD-15 or AD-
50 adapter (respectively) to the device. Then connect the speaker cable
to the adapter.
To switch the speakers on or off, press the power key located at the top
of the speakers. When the speakers are switched on, the green indicator
light is on.