Filter
Top Products
3
For a fixed (non-rotatable) installation, you can install the included locking screws as illustrated below:
Rear Panel Overview
ALWAYS USE THE INCLUDED POWER SOURCE FOR THIS PRODUCT. ANY OTHER SOURCE MAY
DAMAGE THE DEVICE.
The device has three separate video monitors. Each monitor has two inputs and two outputs. These
monitors automatically select PAL or NTSC video formats when a signal is received. The device must be
powered in order to use the outputs. Each monitor can be switched between Video 1 and Video 2 on the
front of the device.
Front Panel Overview
The switch for each monitor selects the desired input. The left side of each monitor selects Video 1, and
the right side selects Video 2.