Filter
Top Products
2
Center speaker system SKC-4800 × 1
Surround speaker system SKR-4800 × 2
The two speakers are identical, so it doesn’t matter
which one you use on the left or right.
• Turn the sound volume to the minimum and
disconnect the power cord from the amplifier before
connecting the speaker cables.
• The nominal impedance of this speaker system is 6 Ω.
Use only amplifiers capable of handling this
impedance.
• Use the supplied speaker cables to connect between
speaker’s input terminals and the amplifier’s speaker
terminals as illustrated on the below.
• Use the red line wires to connect the positive (+)
terminals.
•
Connect the speaker cables
securely to the terminals, with the
core wires twisted properly. In this
case, make sure that the core wires
do not touch each other. Note that
a short circuit in core wires may
result in damage to the amplifier.
Connecting to AV amplifier
Model name
Connections
+–
L
R
SURROUND BACK
SPEAKER
SURROUND
SPEAKERS
FRONT
SPEAKERS A
CENTER
SPEAKER
+–
+– +–
+–
1. Strip the insulation of speaker cables,
and twist the core wires tightly.
2. While pressing the lever, insert the
wire into the hole, and then release
the lever.
3. Make sure that the terminals are
gripping the core wires, not the
insulation.
SKF-4800
Front right speaker
SKF-4800
Front left speaker
SKC-4800
Center speaker
AV amplifier
SKR-4800
Surround
right
speaker
SKR-4800
Surround left
speaker
Red line
Red line