Filter
Top Products
11
1. Turn on your receiver/amplifier
and select the audio input to
which you connected your CD
changer (for example, CD, AUX,
or TAPE).
2. Press
PLAY
to play the CD in
the play position from Track 1.
and
EACH
appear.
To select a different CD, see “Se-
lecting a CD” on Page 12.
To select a different track see “Se-
lecting a Track” on Page 12.
3. While a CD plays, the CD changer
displays the current disc and track
number, the elapsed time of the
current track, and a music calen-
dar that shows the total number of
tracks on the CD (up to 20) with
the current track number flashing.
When the CD changer finishes
playing a track, that track’s num-
ber disappears from the music
calendar.
Repeatedly press
TIME
to display
in order:
• The current track’s remaining
time–
EACH
and
REMAIN
ap-
pear
• The total number of tracks on
the CD and total playing time–
TOTAL
appears.
• The remaining number of tracks
and total time remaining on the
CD–
TOTAL
and
REMAIN
ap-
illustration
pear
• To return to the original display
Note:
During playback, if the
changer is subjected to a sudden
shock or jolt, the rotation speed
might change, or some noise
might be produced. This is not a
malfunction.
4. To temporarily stop playing, press
PAUSE
. appears. Press
PAUSE
again or
PLAY
to re-
sume play.
Or, press
STOP
to stop play be-
fore the last CD ends.
5. After the CD changer plays all
tracks on the current CD, it auto-
matically loads the next higher-
numbered CD and plays all of its
tracks. After it plays all tracks on
the highest-numbered CD, the CD
changer stops.
y y
y
illustration
illustration
42-5072.fm Page 11 Thursday, August 12, 1999 10:55 AM