Filter
Top Products
USER INTERFACE LED INDICATORS
“CLIP“ - When illuminated, indicates the EQ has clipped its output. There are three solutions to this problem:
Reset input gains, turn down source unit (if using analog input) or lower boost on boosted frequencies.
“L” & ”R“ - Indicates which channel is to be equalized. In the default setting, both LEDs are illuminated
indicating that both the left and right channels can be adjusted simultaneously. The channels are “LINKED.”
When only the “L” LED is illuminated, only the left channel is being adjusted. The channels are “UNLINKED.”
When only the “R” LED is illuminated, only the right channel is being adjusted. The channels are
”UNLINKED.”
NOTE: When channels are unlinked, the left and right equalization can be adjusted independently.
CROSSOVER POINTS & SPEAKER POLARITY PHASE SHIFT PROBLEMS
19
34
25Hz
31.5Hz
40Hz
50Hz
63Hz
80Hz
100Hz
125Hz
160Hz
200Hz
250Hz
1000Hz
1250Hz
1600Hz
2000Hz
2500Hz
3150Hz
4000Hz
5000Hz
6300Hz
8000Hz
10000Hz
12500Hz
16000Hz
20000Hz
315Hz
400Hz
500Hz
630Hz
800Hz