Panasonic CQ-C1305U Car Stereo System User Manual


 
Specifi cations
General
Power supply : DC 12 V (11 V – 16 V DC), test voltage
14.4 V, negative ground
Current consumption : Less than 2.1 A
(CD mode; 0.5 W x 4 channels)
Maximum power output : 50 W x 4 channels (at 1 kHz), volume
control maximum
Tone adjustment range : Bass: ±12 dB at 100 Hz,
Treble: ±12 dB at 10 kHz
Speaker impedance : 4 – 8
Pre-amp output voltage : 2.5 V (CD mode, 1 kHz, 0 dB)
Pre-amp output impedance : 200
Dimensions (W x H x D) : 178 x 50 x 160 mm
{7 x 1 15/16 x 6 2/16}
Weight : 1.3 kg {2 lbs. 14 oz}
Front AUX input
Input impedance : 10 k
Allowable external input : 2.0 V
Connector : 3.5 mm Stereo mini-pin
Disc Player
Sampling frequency : 8 times oversampling
DA converter : 1 bit DAC System
Pick-up type : Astigma 3-beam
Light source : Semiconductor laser
Wave length : 790 nm
Frequency response : 20 Hz – 20 kHz (±1 dB)
Signal to noise ratio : 96 dB
Total harmonic distortion : 0.01 % (1 kHz)
Wow and fl utter : Below measurable limits
Channel separation : 75 dB
FM Stereo Radio
Frequency range : 87.9 MHz – 107.9 MHz
Usable sensitivity : 10.2 dBf. (0.9
µV, 75 )
50 dB quieting sensitivity : 15.2 dBf. (1.6 µV, 75 )
Frequency response : 30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity : 75 dB
Stereo separation : 35 dB (1 kHz)
Image rejection ratio : 55 dB
IF rejection ratio : 100 dB
Signal/noise ratio : 62 dB
AM Radio
Frequency range : 530 kHz – 1 710 kHz
Usable sensitivity : 27 dB/µV (22 µV, S/N 20 dB)
Above specifi cations comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 and 1% THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 )
Notes:
• Specifi cations and design are subject to modifi cation without
notice due to improvements.
• Some fi gures and illustrations in this manual may be different from
your product.