Filter
Top Products
11
TPS Operation (Tape Program
Search)
ቢ
Press [3 TPS] to activate the tape program search mode.
ባ
To select a desired program, press [
ii
] or [
jj
] corresponding
times to go backward (up to 8) or forward (up to 9).
(Rewind:) (Fast forward:)
8019
cc
Ex1. To select the current program
again, press
[3 TPS], and
press
[
ii
].
Ex2. To select the previous
program, press
[3 TPS], and
press
[
ii
] twice.
Ex3. To select the next program,
press
[3 TPS] and press [
jj
].
Ex4. To select the 3rd next
program , press
[3 TPS], and
press
[
jj
] three times.
ቤ
Press [3 TPS] again to cancel.
Notes: The TPS mode may not work correctly in the following
cases. This, however, does not mean that the unit is defective.
There is an interval of less than 4 seconds or having a high level
of noise or hum between programs.
There is particularly low-level passage during the program.
Notes:
To maintain your cassette player in top condition, avoid using tapes that are longer than 90
minutes (C-90).
If you insert into the unit a cassette with a loose tape caused by forcing it into cassette with a
finger or the like, the cassette may not be properly reproduced. In such a case, eject the cassette,
make the tape tight, then insert it back into the deck.
4500U
FEW
l
k
d
or
ቢ
ባ
ባ
ቤ
4500U
FEW
l
k